Your guide to install photos / documentation

BP Chargemaster tethered Homecharge unit charging BMW i3


As part of setting up your home charger installation our advisers will ask you for some photos of your property and electricity supply, to make sure there are no delays on your installation day and ensure you get the best possible product.


Below is a breakdown of the photos our team will need from you prior to booking your installation date:

  • Your main consumer unit/fuse box, with the lid open
  • Any other secondary boards at your property
  • Main incoming supply meter cupboard and main fuse with connected accessories
  • Preferred locations of the home charger relative to your off-street parking area
  • Your off-street parking


To make the application process as easy as possible, and to get you charging your Electric Vehicle as soon as we can, we’ve added some examples of the type of photos and documents that are required to comply with the Electric Vehicle Homecharge Scheme (EVHS) and for us to assess the feasibility of installing a bp pulse home charger at your home.



Vehicle documentation

Please provide images of one of the following:

  • V5C (pages 1 and 2 of this form or your vehicle order form)
  • Lease agreement
  • Company car letter

Note: if you do not have a scanner, there are various PDF apps available that will allow you to create a PDF from a photo.

Example of PDF scan of car order form




Photos of your electricity meter cupboard or area

This must be a clear photo showing the cabling running into the supply.

  • A close-up of your main fuse (we are looking for the label that indicates that rating of the main fuse – usually this will be 60amps, 60/80amps, 80amps or 100amps)
  • A wider picture of the area showing the main fuse, meter, wires and any isolation switches (if present)



Do: The whole electricity meter area (including all wires) and the rating of the main fuse is visible (100A)

Example of electric meter area

Don’t: Photo does not clearly show the wiring into and out of the main fuse and the fuse rating is not visible

Example of incorrect meter area




A photo of your mains bonding arrangement

A photo of the protective mains bonding arrangements supplying your home such as oil, gas, and water.

Example of mains bonding




A photo of your fuse board

With the cover open (we need to be able to read the writing on any labels on this unit), and photos of any additional fuse boards you may have at your property).

Do: A clear picture with cover open – all breaker labels are readable

Example of fuse board


Don’t: The photo below is a little blurry (the labels on the breakers cannot be read)

Example of incorrect fuse board photo




Photos of your off-street parking location

To qualify for the subsidised installation, OLEV requires photos that show your off-street parking location in relation to your house and charge point. Usually a photo of the off-street parking location in the foreground and your house in the background will suffice.


Do: Clear full photo, we can easily establish that the off-street parking is part of the property)

Example of off-street parking


Don’t: Photo shows off-street parking location, but the house cannot be seen in this photo

Example of incorrect off-street parking photo




Photos of your preferred home charger location

bp pulse needs to check these photos for nearby metallic objects that may be earthed, i.e. taps, sockets, pipework or lighting. A photo showing the intended location of the home charger and surrounding area is ideal



MPAN (Meter Point Administration Number)

This can be found on your electricity bill. If you are unable to locate this on your electricity bill, please contact your energy provider to obtain this.

The MPAN can be 13 or 21 digits long – either if fine.

Example of MPAN number







Official charging partner with the leading electric vehicle manufacturers